3-SAFETY
3.10
PREDICTABLE ACTIONS THAT ARE INCORRECT AND NOT ALLOWED
-
Never try to stop or hold the box while it is being driven by the belts.
Use only the EMERGENCY STOP BUTTON.
Never work without the safety protections.
Never remove or disable the safety devices.
-
-
- Only authorised personnel should be allowed to carry out the adjustments, repairs or maintenance which re-
quire operation with reduced safety protections. During such operations, access to the machine must be re-
stricted. When the work is finished, the safety protections must immediately be reactivated.
- The cleaning and maintenance operations must be performed after disconnecting the electric power.
- Clean the machine using only dry cloths or light detergents. Do not use solvents, petrochemicals etc.
- Do not modify the machine or any part of it. The manufacturer will not be responsible for any modifications.
- We advise to apply directly to Siat for modifications.
- Follow carefully the installation instructions of this manual.
The manufacturer will notbe responsible for damages caused by improper installation.
3.11
TABLE OF WARNINGS, LABELS, PLATES AND DRAWINGS TO BE FOUND ON THE MACHINE
Before starting any maintenance operations the elec-
trical power must be disconnected.
a
Label code: 3.0.01097.96A
b
Show the sharp knife on the taping head.
Label code: 3.0.01028.96A
Tape threading path for bottom taping unit and posi-
tion of the sharp knife.
c
Label code: 3.0.01024.96A
February 2016
11
ENGLISH
SYMBOLS
COLOURS
DANGER AND PARTS IN MOVEMENT
YELLOW COLOUR
COMPULSORY ACTIONS/PROHIBITION
RED COLOUR
CONTROLS AND INFORMATION
LIGHT BLUE COLOUR
Summary of Contents for SM44 HS
