www.sibotech.net
25
IP address
——
The IP address of ENB-302MT to be connected;
Port
——
The port of ENB-302MT to be connected, and the default is 502;
Function code ——
Support function code: “1”, “2”, “3”, “4”, “5”, “6” , “15”and “16”;
Slave ID
——
Slave address (virtual ID);
Starting address
——
Starting address of registers or coils;
Number
——
Number of registers or coils;
Data (above) ——
The data to be sent;
State
——
Status of response, there is “no response”, “right response”, and “wrong response”;
Data (below) ——
Show the content of response.
Note
：
The format of input data is hexadecimal, must follow such as “12 ff 0c” format. The format of
response data is also hexadecimal.
Summary of Contents for ENB-302MT
Page 29: ...www sibotech net 29...
