If the configuration is not verified, the safe multibeam scanner may not be operated
as a protective device. You can start the safety function manually to test the safe
multibeam scanner and the configuration. The test operation is limited to four hours,
but can be restarted afterwards.
7.4.4
Reading and transferring the configuration using the Safety Assistant app
You can use the Safety Assistant app to read an already verified configuration from one
device and transfer it to other devices.
Take the following points into consideration when reading and transferring a configura‐
tion:
•
You need to establish an NFC connection between the safe multibeam scanner
and the mobile device. To do so, hold the NFC-capable mobile device close to the
marked NFC area.
•
Reading out and transfer are also possible in the voltage-free state of the safe
multibeam scanner.
•
Reading out and transfer are also possible in the in the Safety Assistant app via
the
Configure scanGrid
menu item.
•
The read configurations are stored on the mobile device.
•
When transferring a configuration, you need to select the configuration on the
mobile device based on the configuration checksum.
•
After transferring a configuration to a safe multibeam scanner, the safety function
remains stopped for the time being.
Starting safety function:
°
If the configuration was transferred in a voltage-free state, the safe multi‐
beam scanner must first be supplied with voltage.
°
You must verify that the correct configuration has been transferred to the
safe multibeam scanner. You can use the function for comparing configura‐
tion checksums of the Safety Assistant app for this purpose.
°
After successfully comparing the configuration checksums, you can start the
safety function in the Safety Assistant app.
7.5
Overview (Safety Designer)
On the
Overview
page you will find information about your project and the device as well
as current data of the device.
7
CONFIGURATION
48
O P E R A T I N G I N S T R U C T I O N S | scanGrid2 I/O
8025936/2021-01-08 | SICK
Subject to change without notice
