The
Log
contains messages from the GUI and the device.
The system assigns each log message a level, either
Error
,
Warning
, or
Info
. You see log
messages on the selected level and the levels above it. Selecting
Info
in the list will
show all log messages. With the
Search log message
function, it is possible to filter within
the selected visible log messages.
The
Open log folder
button opens a file browser at the location of the log file, allowing
easy access to the stored log.
Figure 70: Log section
9.1.6
Status bar
At the bottom of the screen, the following information about the currently connected
and selected device is shown:
•
Model of the device
•
IP address of the device
•
Device type
•
Software version
•
Firmware version and FPGA
•
Frame ID of the image that is currently displayed.
NOTE
The frame ID is reset each time the camera is restarted.
9.2
Using the interface
The common way of working is to iterate until you are satisfied with the configuration
and the quality of the received data.
It is assumed that the Ruler3000 and
Stream Setup
are installed and working properly.
How to install the Ruler3000 and Stream Setup is briefly described in
. When capturing 3D images, it is beneficial if you also have movement and
some kind of photoelectric switch or similar device connected to the camera.
We also assume that you have placed some objects to measure in the laser plane. The
object should fit into the field of view of the Ruler3000.
9.2.1
Importing and exporting configuration files
Tabs:
Cameras
,
2D Image
,
3D Image
Configuration files (.csv format) can be saved and loaded to and from the device. The
configuration files use a proprietary text-based format.
Click the camera action menu. The button is located to the right on the
Cameras
tab, and to the left on the control bar when
2D Image
or
3D Image
tabs are open.
Import configuration
To import a .csv file with pre-defined parameter settings, do as follows:
1.
In the menu, select
Import configuration
.
2.
Find and select the parameter file and click
Open
.
✓
The parameter settings are loaded.
OPERATION
9
8026049//2021-04 | SICK
O P E R A T I N G I N S T R U C T I O N S | Ruler3000
71
Subject to change without notice
