Export configuration
To save the current parameter settings, do as follows:
1.
In the menu, select
Export configuration
.
2.
Find a place to store the file, name it, and click
Save
.
✓
The parameter settings are saved as a .csv file.
9.2.2
Booting the device using a camera configuration
A
Camera configuration
contains a full set of parameter values that can be used for
booting and resetting the device to a known configuration state. Up to five camera
configurations can be stored on the device.
The device can be programmed to boot from either one of the stored camera config‐
urations, or from the built-in
Default
parameter values. If no camera configuration is
selected, the
Default
configuration is used. The Default configuration is read-only and
cannot be modified.
NOTE
A
Camera configuration
is only valid for the firmware version that was used when the
configuration was saved.
Figure 71: Camera configurations GUI reference
Click the camera action menu. The button is located to the right on the
Cameras
tab, and on the control bar when
2D Image
or
3D Image
tabs are open.
To save a camera configuration:
1.
Make sure the parameter values are configured correctly.
2.
Select
Camera configurations
from the menu.
3.
Select a
UserSet
to use for storing the current parameter values.
4.
Click
Save
. You also have the option to enter a description of the
Camera configura‐
tion
in the
Description
field.
9
OPERATION
72
O P E R A T I N G I N S T R U C T I O N S | Ruler3000
8026049//2021-04 | SICK
Subject to change without notice
