1
About this document
1.1
Scope
These operating instructions only apply to the scanGrid2 CANopen safe multibeam
scanner with one of the following type label entries in the “Operating Instructions” field:
•
8025988
This document is included with the following SICK part numbers (this document in all
available language versions):
8025988
1.2
Target groups of these operating instructions
Some chapters of these operating instructions are intended for certain target groups.
However, the entire operating instructions are relevant for intended use of the product.
Table 1: Target groups and selected chapters of these operating instructions
Target group
Chapters of these operating instructions
Project developers (planners, developers,
designers)
"Project planning", page 17
"Configuration", page 63
"Technical data", page 99
"Accessories", page 105
Installers
Electricians
"Integrating the equipment into the electrical
control", page 30
"Electrical installation", page 61
Safety experts (such as CE authorized repre‐
sentatives, compliance officers, people who
test and approve the application)
"Project planning", page 17
"Configuration", page 63
"Commissioning", page 86
"Technical data", page 99
"Checklist for initial commissioning and com‐
missioning", page 112
Operators
"Operation", page 88
"Troubleshooting", page 92
Maintenance personnel
"Maintenance", page 90
"Troubleshooting", page 92
1.3
Further information
The following information is available via the Internet:
•
This document in other languages
•
Data sheets and application examples
•
CAD files and dimensional drawings
•
Certificates (such as the EU declaration of conformity)
•
Guide for Safe Machinery. Six steps to a safe machine
•
Safety Designer (software for configuring and diagnosing safety solutions from
SICK AG)
•
Safety Assistant (app for transferring configurations and diagnosing safety solu‐
tions from SICK AG)
ABOUT THIS DOCUMENT
1
8025990/2021-03-03 | SICK
O P E R A T I N G I N S T R U C T I O N S | scanGrid2 CANopen
7
Subject to change without notice