CLV620
Number of multiple readings
1 ... 99
1)
Reading interval: The time window generated internally by the reading cycle for code detection and evaluation.
NOTE
The bar codes being read must conform to at least quality level C in accordance with ISO/IEC 15416.
Interfaces
CLV620
Serial (RS-232,
RS-422/-485)
Function:
Host, AUX (RS-232 only)
Data transmission rate
: 2.4 kBd ... 115.2
kBd, AUX: 57.6
kBd (RS-232)
Ethernet
Function
: Host, AUX
Data transmission rate
: 10/100
Mbit/s, half/full duplex
Protocol
: TCP/IP, EtherNet/IP, PROFINET Single Port
CAN
Function
: SICK CAN sensor network (master/slave, multiplexer/server)
Data transmission rate
: 20
kbit/s ... 1
Mbit/s
Protocol
: CSN (SICK CAN sensor network), CANopen
PROFINET
PROFINET Dual Port optional over external fieldbus module CDF600-2
EtherCAT
®
Optional via external fieldbus module CDF600
PROFIBUS DP
Optional via external fieldbus module CDF600-2
DeviceNet
Optional over external connection module CDM420 and CMF fieldbus module
Digital inputs
2 inputs (“Sensor 1”, “Sensor 2”), optional 2 additional inputs via CMC600 parameter cloning
module in the CDB650 or CDM420 connection module
Opto-decoupled, V
in
= max. 32
V, reverse polarity protected, can be wired via PNP output,
adjustable debounce time 0
ms ... 10000
ms
Digital outputs
2 outputs (“Result 1”, “Result 2”), optional 2 additional outputs via CMC600 parameter
cloning module in the CDB650 or CDM420 connection module
PNP, I
out
= max. 100
mA, short-circuit protected, adjustable pulse duration (static, 10
ms ...
10000
ms)
Reading pulse
Pulse sources for start:
Digital inputs “Sensor 1” and/or “Sensor 2”; Command (data inter‐
face), Auto pulse, CAN
Pulse sources for stop:
Pulse sources for stop: Reading cycle source, digital inputs “Sensor
1”, “Sensor 2” Command, Timer, Condition (e.g., Good Read)
Optical indicators
Not accessible
Acoustic indicator
None
Control elements
Configuration software
Service function
Backup of parameterization data (parameter cloning) outside the device memory: External,
optional CMC600 parameter cloning module in CDB or CDM connection module
Configuration
SOPAS
ET configuration software, profile programming with bar codes (can be deactivated),
command language, GSD parameterization
Mechanics/Electronics
CLV620
Connection type
2 x round connections (1 x male connector, M12, 17-pin, A-coded, 1 x female connector,
M12, 4-pin, D-coded)
Supply voltage
10
V
DC ... 30
V
DC, LPS or NEC Class 2, reverse polarity protected
Power consumption
1)
Max. 4.5
W
Housing
Stainless steel
Housing color
Unpainted
7
TECHNICAL DATA
32
T E C H N I C A L I N F O R M A T I O N | CLV62x, CLV63x and CLV64x with IP69K Protective Housing
8021479/19ZB/2021-10-29 | SICK
Subject to change without notice