Compact FlexFix bracket
53
9,7
30
30
4,5
30
5,2
49
30
36,6
25,2
ø
5,2
Figure 36: Dimensional drawing of the Compact FlexFix bracket
14.2
Mounting accessories
Table 23: Mounting accessories ordering information
Part
Part number
Alignment tool
4084133
14.3
Weld spark guard
Overview
The weld spark guard can be used to protect the front screen of the safety light curtain.
The weld spark guard reduces the scanning range of the system by 15%.
Differing minimum distance to reflective surfaces for devices with a resolution of
30 mm with weld spark guard
If a device with a resolution of 30 mm is used with the weld spark guard, the following
applies in contrast to other specifications in order to determine the minimum distance
from reflective surfaces:
1.
Determine the distance D between sender and receiver in meters (m).
2.
Read the minimum distance a in millimeters (mm) in the graph or calculate it
based on the respective formula (
).
14
ACCESSORIES
64
O P E R A T I N G I N S T R U C T I O N S | deTec2 Core
8014276/1DCM/2022-10-27 | SICK
Subject to change without notice
