70
8011952/YWL2/3-0/2016-08| SICK
O P E R A T I N G I N S T R U C T I O N S | DUSTHUNTER C200
Subject to change without notice
4
START-UP AND PARAMETER SETTINGS
4.4.3
Determining the function check
Interval time, control value output on the analog output and the starting timepoint for auto-
matic function check can be modified in the “Adjustment / Function Check - Automatic”
directory.
Fig. 46: SOPAS ET menu: MCU/Adjustment/Function Check - Automatic (example)
see “Factory settings”, page 69
Entry field
Parameter
Remark
Output duration of
function control
value
Value in seconds
Output duration of control values.
Function check
interval
Time between two
check cycles
Function Check
Start Time
Hour
Defining a start timepoint in hours and minutes.
Minute
The value measured last is output during control value determination (
check output on a plotter”, page 14
).
