2
Safety information
2.1
Intended use
The SIG350 is a remote IO-Link input and output module for connecting a EtherCAT
network.
Intended use requires that the device is used industrially indoors without any spe‐
cific climatic and atmospheric requirements. Operation of the device according to its
intended use and enclosure rating IP 67 are only guaranteed if open male and female
connectors are sealed with blind plugs. Intended use also includes EMC-compliant
electrical installation.
If the product is used for any other purpose or modified in any way, all warranty claims
against SICK AG will be void.
NOTE
This document is aimed at the trained specialist personnel. Qualified specialist person‐
nel are persons who are familiar with work such as the installation and operation of the
product, and who have the necessary qualifications for this activity. All claims against
the manufacturer in respect of warranty and liability shall be invalidated in the event of
damage resulting from unauthorized manipulation or incorrect use. The operating entity
is responsible for ensuring that the work safety regulations and accident prevention
regulations applicable in the specific individual case are observed.
2.2
Improper use
•
The device does not constitute a safety-relevant device according to the EC Machi‐
nery Directive (2006/42 / EC).
•
The device must not be used in explosion-hazardous areas.
•
Any other use that is not described as intended use is prohibited.
•
Any use of accessories not specifically approved by SICK AG is at your own risk.
The device is not suitable for the following applications (this list is not exhaustive):
•
As a safety device to protect persons, their hands, or other body parts
•
Underwater
•
In explosion-hazardous areas
•
Outdoors, without additional protection
NOTICE
Danger due to improper use!
Any improper use can result in dangerous situations.
Therefore, observe the following information:
b
The device should be used only in line with intended use specifications.
b
All information in these operating instructions must be strictly complied with.
2
SAFETY INFORMATION
6
O P E R A T I N G I N S T R U C T I O N S | Sensor Integration Gateway - SIG350
8027836./2022-06-10 | SICK
Subject to change without notice