To parameterize the SIG350, double-click on any point on the project icon. The device
window opens, in which all device parameters are displayed. This device window is
identical to the contents of the web interface (
see "Web interface structure", page 54
).
Here the parameterization can be carried out, parameters can be loaded into or from
the device or parameter values can be observed.
NOTE
The user login is not done via SopasET directly, but via the device interface (
"Logging user in and out", page 61
). The Import/Export parameter is not supported.
8
OPERATION
66
O P E R A T I N G I N S T R U C T I O N S | Sensor Integration Gateway - SIG350
8027836./2022-06-10 | SICK
Subject to change without notice