R
e
fe
re
n
c
e
M
a
n
u
a
l
ID
M
B
lu
e
to
o
th
Configure Your IDM BT
8014563/VP14/2011-11-30
© SICK AG · Germany · All rights reserved · Subject to change without notice
50
S
S
S
S
PROGRAM
Serial Interface Control
♦
♦
♦
♦
Delay Setting
♦
♦
♦
♦
F_DEFAULT
Family Code Selection
P.C
Parameter Selection
Option Code
Intermessage Delay
SS
MS
None
1-99 (x10) msec
.
Scan 2 digits from the option code chart in Appendix, then IDM BT will terminate this
selection automatically.
FIN
(2 digits)
Intercharacter Delay
SS
MS
None
1-99 (x5) msec.
Scan 2 digits from the option code chart in Appendix, then IDM BT will terminate this
selection automatically.
FIN
(2 digits)
Interfunction Delay
SS
MS
None
1-99 (x5) msec.
Scan 2 digits from the option code chart in Appendix, then IDM BT will terminate this
selection automatically.
FIN
(2 digits)
Intermessage Delay
is a time delay between messages output by IDM. Increasing this delay will help host applications process the incoming data on time.
Intercharacter Delay
is a time delay between data characters output by IDM. These two parameters are used to synchronize data communication when : 1) the data
transmission speed is too fast, characters may be skipped; 2) multitasking operation system or host computers in a network may slow down the keyboard handling; 3)
various notebook or desktop PC systems require different timing parameter settings. Please always add one extra unit as safety margin when adjusting these two
parameters.
Interfunction Delay
is a time delay between the transmissions of each segment of the message string.
Intermessage Delay
,
Intercharacter Delay
and
Interfunction Delay
cannot be only worked under SPP and HID modes.
