ID
M
W
L
A
N
ID
M
W
L
A
N
R
e
fe
re
n
c
e
M
a
n
u
a
l
8014567/2012-02-09
© SICK AG · Germany · All rights reserved · Subject to change without notice
10
S
S
S
S
Find out required information for network settings
SSID
The SSID is an 802.11 service set identifier of Independent Wireless Host or Access Point (AP).
Operation Mode
The Wi-Fi scanner supports both “Infrastructure” and “Ad-Hoc” modes. Please note that if you select Ad-Hoc mode, you are
suggested to use the Static IP. And the Gateway and Subnet Mask have to be the same as the remote host.
Region and Channel
The region is where the Wi-Fi scanner is used, and the channel number must be the same as the channel setting of AP or
the remote host.
Security
The Encryption and Authentication will be used to communicate with the AP or the remote host, such as WEP, WPA and
WPA2.
IP Type
Both Static IP and DHCP can be used in your wireless network. But you are recommended to use Static IP for better
management purpose.
Remote IP Address and Port
The Remote IP Address is an IP address of the remote host. And the Port will be a listen port of e.g. WaveCentre used to
communicate with your Wi-Fi scanners.
Local IP Address
The Local IP Address is the IP address of the Wi-Fi scanner.
