ID
M
W
L
A
N
ID
M
W
L
A
N
R
e
fe
re
n
c
e
M
a
n
u
a
l
8014567/2012-02-09
© SICK AG · Germany · All rights reserved · Subject to change without notice
25
S
S
S
S
Batch Mode (Offline data collection)
In batch mode is used as a data collection device. It is an ideal cost-effective solution to fulfill most inventory applications.
Before you start to use batch scanning, please enter “SETUP” then select “Batch Scanning” to configure all available
options listed below. Moreover, the “Auto Save” and “Auto Delete” functions will help you to simplify the routine operation of
data collecting.
Input Fields
Besides the field of “Item No.”, three more input fields are available for choice, including “Quantity”, “Location” and
“Timestamp”. By default, both “Item No.” and “Quantity” fields are enabled. Please note that if you changed the composition
of input fields, all stored data will be DELETED.
Validation
You can set the desired input range of each field. The scanner will do the validation automatically after the inputs of each
field are completed.
Field and Record Delimiters
Both field delimiter and record delimiter can be changed to meet your application demand.
Transmission Sequence
The transmission sequence of each field can be re-arranged to meet your needs.
Transmission Interface
The scanner is preset to transmit all stored data through Wi-Fi. Alternatively, you can transmit the stored data through
physical USB interface by changing the transmission interface to USB COM or USB HID. In this case, a charging cradle has
to be used together with your scanner.
Auto Save
After completing the inputs of each record, the scanner will save the data into storage automatically then go to next record
input immediately. You do not need to press “Save” (L Key) to save data. If you still prefer to save data manually, please
disable this Auto Save function.
Auto Delete
The scanner is preset to keep all stored data after data transmission in case it needs to be retrieved later. You have to delete
all records manually. If you prefer the scanner to perform “Auto Delete” after data transmission, please enable this function.
Link Control
For power saving, the Radio can be disabled during batch scanning. When you want to transmit the data via Wi-Fi, the
scanner will activate the Radio and re-connect automatically.
