ID
M
W
L
A
N
ID
M
W
L
A
N
R
e
fe
re
n
c
e
M
a
n
u
a
l
8014567/2012-02-09
© SICK AG · Germany · All rights reserved · Subject to change without notice
26
S
S
S
S
Run Batch Scanning
After completing all necessary settings of batch scanning, you can enter “BATCH” from the main menu of Desktop to
perform batch scanning.
Under this mode, all input data will be stored until the memory storage is full. If the “Auto
Save” is enabled, all data will be saved automatically after the inputs of each record are
completed. You can continue to the next record input immediately.
Navigation Key
For manual inputs, you can use the Navigation Key to activate virtual keyboard for manual
data entry. Moreover, you can use the navigation key to browse previous input records as
well.
Press “Func” (R key) to enter the function menu of batch scanning. Then select your desired
function to perform the data transmission or to manipulate the stored records.
Transmit Data
The scanner is preset to transmit the stored data through Wi-Fi. During the transmission
process, the scanner will give continuous short clicks and blue blinks. Then the scanner will
give two short beeps after data transmission is completed.
If you want to transmit the stored data through USB interface, please make sure a cradle has
been properly connected to the host with a USB cable. You have to place the scanner onto
the cradle right after you press “Transmit Data”. All stored data will be transmitted via your
specified interface (USB COM or USB HID).
Default Screen
Input screen with all
available input fields