ID
M
W
L
A
N
ID
M
W
L
A
N
R
e
fe
re
n
c
e
M
a
n
u
a
l
8014567/2012-02-09
© SICK AG · Germany · All rights reserved · Subject to change without notice
8
S
S
S
S
Use USB Bus Power
Plug the AC power plug into the appropriate AC wall socket.
Plug the DC power cord of the power supply unit into the DC power jack of the cradle. The cradle will issue the power on
beeps. The center (IDM140 cradle) or upper (IDM160 cradle) indicator of smart cradle will give one blue blink. The
power indicator of charging cradle will turn steady blue.
Place the scanner on the cradle. The status indicator of scanner will turn steady red if the battery is not fully charged.
When the battery is fully charged, the status indicator of scanner will flash green at regular interval.
Please charge the new battery pack for 8 hours prior to the first use.
If USB 3.0 is available in your host device, both battery charging and regular operation can be supported by the USB
Bus Power without using external power supply.
If you want to use this feature, please slide the USB bus power switch to “ON”. Then connect the cradle and host device
via USB cable.
