Operating Instructions
Chapter
2
LD-MRS
For your safety
8012948/ZMQ0/2017-06-09
©
SICK AG · Germany · All rights reserved · Subject to change without notice
11
2.3
Intended use
The LD-MRS allows two applications with its radial field of view:
•
The detection of objects around the location or installation site while continuously out-
putting measurements upon request, or
•
Field monitoring of freely definable areas while signaling field violations via external
switch outputs
The device is designed for application in the industrial sector, in particular outside.
Important
Every other use as well as modifications to the device, including those within the course of
mounting and electrical installation, will render void any warranty claim towards SICK AG.
Only operate the LD-MRS in the permitted ambient temperature range, see
Technical specifications, Page 94
.
The user of the LD-MRS has to ensure that
•
the device is only used in compliance with the listed specifications and environment
conditions, see
Chapter 9.1 Data sheets, Page 94
,
•
country-specific standards and regulations are adhered to, depending on the kind of
operation,
•
the device is only used in proper, functional state,
•
safety and warning labels attached to the device are not removed or covered and re-
main readable,
•
the operating instructions are available on site in a readable form and that the autho-
rized personnel had read the operating instructions and is thus sufficiently qualified.
Important
Loss of warranty!
The housing of the laser measurement sensor LD-MRS is closed with a seal. Breaking the
seal and opening the device causes a loss of warranty claims towards SICK AG. The housing
may only be opened by authorized service personnel of SICK AG.