6
COMMISSIONING
136
8017768/12AX/2019-05-31|SICK
O P E R A T I N G I N S T R U C T I O N S | TIC
Subject to change without notice
6.8.2
Saving vehicle data
The “Vehicles” list view also allows you to save the measured values for the vehicles onto
a local hard drive.
•
To save the data for a specific vehicle, click the associated “Save” icon on the right-
hand side of the list.
•
If you want all the vehicles currently listed in TEMS Manager to be written to a local
hard drive, go to the toolbar and click the
Save all vehicles
icon. Please note that only
the last 50 measured vehicles can be displayed and saved in TEMS Manager.
If the
Disk Storage
plug-in has been activated,
all
of the vehicle data stored on the Traffic
Controller under the
/data
directory can be downloaded using an
FTP download
(see
chapter
3.5.3 Plug-ins for saving and downloading the vehicle data
1. Connect to the FTP server of the Traffic Controller using an FTP client (e.g., FileZilla).
2. Log in by entering
client
for the user name and
client
as the password.
6.8.3
Accessing detailed information about a vehicle
6.8.3.1
3D model and measurement results
For each vehicle, you can open a details page that contains additional information.
▸
To do this, click inside the relevant vehicle line. The details page appears in the same
browser window.
The measured values for the vehicle are displayed in the
Info
area. The
3D-Model
area
contains the three-dimensional model of the vehicle.
Note
