SYSTEM DESCRIPTION
3
31
8017768/12AX/2019-05-31|SICK
Subject to change without notice
O P E R A T I N G I N S T R U C T I O N S | TIC
3.3.5
Measurement site for additional axle counting
The
LMS Axle
system component for counting axles is mounted at the side of the lane.
This mounting position ensures that the side of the vehicle is captured.
An LMS Axle typically monitors the next-closest lane. When monitoring several lanes with
an LMS Axle, shading by vehicles driving next to each other is possible.
That is why two TIC102 / TIC502 units are typically extended by two LMS Axle units in the
configuration for two lanes with additional axle counting. The LMS Axle is connected to the
TIC102 / TIC502 in the lane in which axles are to be counted.
Fig. 20: Measurement site – axle counting