COMMISSIONING
6
123
8017768/12AX/2019-05-31|SICK
Subject to change without notice
O P E R A T I N G I N S T R U C T I O N S | TIC
2. You can define your preferred external category system via the
ExternalCategorySystem
parameter.
6.6.7
Working with the Axle Overruler
The
Axle Overruler
system function enables you to set up rules for checking how many
axles the system has counted for a vehicle. If one of the rules is applicable, the figure can
be
corrected
and thus
overwritten
.
Depending on which vehicle classes are checked under the rule and the probability of the
vehicle belonging to one of these classes, the number of axles can be changed to an
exact value or narrowed down to a minimum or maximum number of axles.
For example, the axle number 4 can be entered for all vehicles belonging to the
car
carrier transporter
class because their low-lying trailers make it difficult for the LMS axle
to identify the axles clearly. For vehicles placed in the
Car
and
Bike
classes, the number
of axles can be restricted to exactly 2.
The rules have to be defined in conjunction with your local SICK contact.
Examples
Note
