WARNING
Dangerous equipotential bonding currents!
Improper grounding can lead to dangerous equipotential bonding currents, which may
in turn lead to dangerous voltages on metallic surfaces, such as the housing. Electrical
voltage can cause severe injury or death.
■
Work on electrical systems must only be performed by qualified electricians.
■
Follow the notes in the operating instructions.
■
Install the grounding for the product and the system in accordance with national
and regional regulations.
RFU63x-131xx (with internal antenna):
WARNING
High-frequency electromagnetic radiation!
High-frequency electromagnetic radiation poses a potential health risk.
The
RFU63x-13100
1)
device is designed for operation according to ETSI EN 302208.
When operating with an internal antenna and/or external
RFA630-x00
2)
antennas, the
human exposure regulations covered by EN 50364 must be observed.
■
In order to limit human exposure to electromagnetic fields, suitable safety dis‐
tances must be maintained during both short-term and long-term work in the radi‐
ation range of the antennae.
Minimum distances to be maintained between the antenna and the human body
during long-term transmission:
30 cm at max. antenna radiation power of 2 W ERP as per ETSI
15 cm at reduced radiation power of 1 W ERP
10 cm at radiation power of 0.5 W ERP
The
RFU63x-13101
3)
device satisfies the limit values of the FCC for exposure to radia‐
tion in an uncontrolled environment.
■
During operation with the integrated antenna and/or the external
RFA630-x01
4)
antennas, a safety distance of at least 30 cm must be maintained between the
antenna and the human body.
RFU63x-041xx (without internal antenna):
1)
For regional assignment, see type-specific online data sheet in the Internet at:
2)
For regional assignment, see the online data sheet in the Internet at:
3)
For regional assignment, see the type-specific online data sheet in the Internet at:
SAFETY INFORMATION
2
8014335/ZTL9/2018-10-14 | SICK
O P E R A T I N G I N S T R U C T I O N S | RFU63x, RFU65x
13
Subject to change without notice
