12
Technical data
NOTE
The relevant online data sheet for your product, including technical data, dimensional
drawing, and connection diagrams can be downloaded, saved, and printed from the
Internet:
•
•
These operating instructions provides additional technical data if required.
12.1
Technical data RFU63x
12.1.1
Features
Table 22: Technical data for RFU63x-131xx: Features
RFU63x-131xx
Version
(Working area)
Long range
Product category
RFID read/write device (UHF)
with
internal antenna
Frequency band
UHF (860 MHz ... 960 MHz)
Radio equipment approval
(Regional assignment)
Type-dependent. See type-specific online data sheet at:
Carrier frequency
Transmission output power
RFID standard (air inter‐
face)
EPCglobal UHF Class 1 Generation 2, ISO/IEC 18000-6C
Labeling in type code: RFU6x
0
-xxxxx
Modulation
PR-ASK, DSB-ASK
Connection type
Ethernet
MTBF
14 years
1)
Scanning range
≤ 10 m
2)
3)
Antenna
Internal antenna
•
Circularly polarized
•
Maximum 9 dBic gain
•
Axis behavior typically < 2 dB
•
Aperture angle 72°
•
Front-to-back ratio, typically > 17 dB
External antennas
•
Maximum 3 external antennas, mono-static, up to +30 dBm,
adjustable
Transmitting power of all antennas can be set separately
Service functions
Optional, semi-automated saving of parameter data (parameter
cloning) outside the device memory:
•
Using insertable microSD memory card
4)
in the device
•
Using parameter cloning module CMC600
4)
in the CDB
4)
or
CDM
connection module
4)
•
Externally in CDF
fieldbus module
4)
Clock
Network time protocol (NTP), no internal clock
Conformities
Type-dependent. See type-specific online data sheet at:
TECHNICAL DATA
12
8014335/ZTL9/2018-10-14 | SICK
O P E R A T I N G I N S T R U C T I O N S | RFU63x, RFU65x
87
Subject to change without notice
