7
Configuration
7.1
Delivery state
On delivery, the safety laser scanner is in a safe state.
•
The operational status of the safety laser scanner is
Waiting for configuration
.
•
The output signal switching devices (OSSDs) are in the OFF state, the red LED is
illuminated:
Ê
.
•
The 7-segment display indicates
.
7.2
CDS
You will require a CDS (Configuration & Diagnostic Software) to configure and diagnose
faults with these devices.
Approach
1.
Open the download web page by entering
CDS
in the search field on
2.
Take note of the system requirements on the download page.
3.
Download the installation file from the download page. Extract it and run it.
4.
Follow the notes from the setup assistant.
7.3
Preparing the configuration
Prerequisites
•
The safety laser scanner has been correctly mounted and the electrical connec‐
tions are in place.
•
The necessary tools are at hand.
•
Current version of the CDS
•
Service cable for connecting the PC and the safety laser scanner (not included
with delivery)
Approach
b
To configure and diagnose the device using the CDS, connect the PC to the service
cable of the safety laser scanner .
Complementary information
NOTE
•
Make sure that the service cable is not laid close to powerful electrical drives or
cables carrying high currents. This will avoid EMC effects on the service cable.
•
The service cable must only be connected for configuration and diagnostics. The
service cable must be plugged in and the protective cap attached during opera‐
tion.
NOTE
•
For more information on configuration, see the online help of the CDS (Configura‐
tion & Diagnostic Software).
•
You can use the password function in the CDS to protect the configuration settings
from unauthorized access if you store the passwords in such a way that they too
are protected from unauthorized access.
7
CONFIGURATION
64
O P E R A T I N G I N S T R U C T I O N S | S3000 Cold Store
8012029/ZA20/2019-11-14 | SICK
Subject to change without notice
