CMS functionality
On the S3000 Expert, further parameters, in addition to those described above, can be
configured for the CMS functionality.
The
Send mode
option is used to configure whether the measurement data output is to
be triggered as a
Continuous data output
,
Data output only on request
or by an
Internal event
.
If
Internal event
is selected, this event must be defined.
With
Continuous data output
, the data to output must be selected.
If
Measurement data output
is also enabled, it is necessary to select whether the measure‐
ment data are to be output together with the I/O data in
one telegram
or in
two separate
telegrams
.
For the measurement data output, one to five segments, which are defined by start and
end angles, need to be specified.
For further details on this topic, see the “Telegram Listing CMS” documentation (part
no. 9090806).
CONFIGURATION
7
8009942/ZA18/2019-11-14 | SICK
O P E R A T I N G I N S T R U C T I O N S | S3000
115
Subject to change without notice
