25
M O U N T I N G I N S T R U C T I O N S | safeRS, safeRS3
8024924/1FGF/2022-03-01 | SICK
Subject to change without notice
MOUNTING INSTRUCTIONS
3
Component structure
3.1
safeRS Control
A
Part
Description
A
DIP switch to turn on/off the bus termination resistance:
l
On (default) = resistance included
l
Off = resistance excluded
B
Digital inputs status LED
C
CAN bus terminal block for connecting the first sensor
D
Micro USB port for connecting the computer and communicating with the
safeRS Designerapplication
E
Safety outputs status LED
F
Auxiliary outputs status LED
G
Power supply terminal block
H
Digital inputs terminal block
I
System status LED
L
Safety outputs terminal block
M
Auxiliary outputs terminal block
3.2
safeRS3 Control
B
Part
Description
A
I/O terminal block
B
System status LEDs
C
Network parameter reset button
D
Reserved for internal use. Output reset button
E
Micro-USB port (micro-B type) for connecting the PC and communicating
with the safeRS3 Designer application
F
1)
Micro-USB port (reserved)
G
1)
Fieldbus status LEDs
H
1)
Ethernet port with LEDs for connecting the PC, communicating with the
safeRS3 Designerapplication, and for Modbus communication
I
Power supply terminal block
J
Power supply LEDs (steady green)
K
CAN bus terminal block for connecting the first sensor
L
DIP switch to turn on/off the bus termination resistance:
l
On (top position, default) = resistance included
l
Off (bottom position)= resistance excluded
M
CPU LEDs
N
1)
Ethernet Fieldbus port n. 1 with LEDs
O
1)
Ethernet Fieldbus port n. 2 with LEDs
Note
1)
: only for safeRS3 Control PROFINET.
