5
Mounting
The SIG200 is mounted with two screws, maximum M6, and two flat washers.
Observe the maximum permissible tightening torque of 0.8 Nm.
2 x M6
< 0.8 Nm
Figure 2: Mounting
Scope of delivery:
•
SIG200
•
5 blind plugs (on Port CONFIG, S2, S3, S4, P1)
•
Quickstart instruction
•
20 labels for the label pocket
To ensure proper ground connection to the housing, the coating on the housing around
the mounting screws must be removed.
NOTE
There can be several SIG200 mounted side by side without observing a minimum
distance between each IO-Link Master.
NOTE
There are no blind plugs at ports P1, S1 and Power.
NOTE
There are no screws inlcuded in the scope of delivery.
5
MOUNTING
10
O P E R A T I N G I N S T R U C T I O N | Sensor Integration Gateway - SIG200
8017853.1D0S/2021-11-04 | SICK
Subject to change without notice