background image

Properties

Value

Coding

0

No device inspection: No inspection is performed on
this IO-Link port regarding the correct device ID, manu‐
facturer ID or serial number.

1

Type-compatible device (V1.0): An inspection is only per‐
formed on the IO-Link port with regard to the correct
device ID and manufacturer ID.

2

Type-compatible device (V1.1): An inspection is per‐
formed on the IO-Link port with regard to the revision
ID, device ID and manufacturer ID.

3

Type-compatible device (V1.1) with restore: An
inspection is performed on the IO-Link port with regard
to the revision ID, device ID and manufacturer ID. Data
storage (reading and writing) is permitted.

4

Type-compatible device (V1.1) with restore: An inspec‐
tion is performed on the IO-Link port with regard to the
revision ID, device ID and manufacturer ID. Data storage
(writing) is allowed.

NOTE

For data storage, "Expected Vendor ID" and "Expected Device ID" must be set and must
match the connected device (for details see 

see "Data Storage", page 102

).

7.1.2.2.1.4

Expected manufacturer ID

Expected Vendor ID

 can be used to specify the vendor ID with which a connected IO-Link

device must match.

NOTE

The manufacturer ID is only checked at inspection level "1" to "4".

Properties

Value

PROFINET access

Commissioning protocol for all IO-Link device submodules (except
"Digital input", "Digital output"; slot 2, subslot 2 to 5)
Byte 6 to 7: Expected manufacturer ID

SIG200-IO-Link master (slot 2, subslot 1)
Index 0xB100/0xB101/0xB102/0xB103, byte 6 to 7: Expected
manufacturer ID

Coding

Any

Expected manufacturer ID of the IO-Link device con‐
nected to the IO-Link port (unsigned integer 16)
Example: Manufacturer ID SICK AG = 26

7.1.2.2.1.5

Expected device ID

Expected Device ID

 can be used to specify the device ID with which a connected IO-Link

device must match.

NOTE

The device ID is only checked at inspection level "1 "to "4".

SIG200 CONFIGURATION

36

O P E R A T I N G   I N S T R U C T I O N | Sensor Integration Gateway - SIG200

8017853.1D0S/2021-11-04 | SICK

Subject to change without notice

Summary of Contents for SIG200



































































































































Reviews: