CONFIGURATION OF THE DEVICE SETTINGS
7
33
8027311 / V1-0/2022-04|SICK
Subject to change without notice
O P E R A T I N G I N S T R U C T I O N S | TDC-E (Telematic Data Collector)
7.2
System settings
•
The following sections describe how to configure the device settings using the
Device Manager user interface.
•
Alternatively, the settings can also be made via the integrated REST API interface.
The corresponding commands are listed at the end of each section.
•
Section
7.6 Use REST API interface for Device Manager
provides a brief introduction to
the Device Manager REST API library and the required authentication of access to the
device data.
7.2.1
System
•
Provides an overview of the central device settings.
•
Device and host names of the TDC-E can be changed.
•
The temperature sensor installed inside the TDC-E supplies temperature values
continuously so that any impending risk of the TDC-E overheating can be detected in
good time. The current device temperature is displayed in the
Resources
area under
Board temperature
.
•
The
Resources
area also provides information about the internally available memory.
The TDC-E can be rebooted remotely.
▸
To do this, click on
Reboot
under System.
The reboot takes about 180 seconds.
Overview
Restart
via remote
