68
8015383/ZUQ7/V1-3/2020-06 | SICK
O P E R A T I N G I N S T R U C T I O N S | TRANSIC151LP
Subject to change without notice
10
SPECIFICATIONS
10.3
Approvals for pressure in Canada
CRN - Canadian Registration Number
Technical limit values for Canada
10.4
Technical Data
10.4.1
Dimensions and bore patterns
Fig. 44: Wall bracket
Province
CRN
Alberta
[1]
0F18864.52
British Columbia
0F18864.51
Manitoba 0F18864.54
Ontario
0F18864.5
Quebec
CSA-0F18864.56
Saskatchewan
CSA-0F18864.56
[1]
Observe the following for product versions with clamping flange:
When a clamping flange is used in Alberta, a
clamping flange with CRN approval of a third-party supplier must be used.
CRN No.
0F18864.51
Maximum Allowable Working Pressure (MAWP)
150 psi (10 bar(g))
Minimum Design Metal Temperature (MDMT)
−
4 … 176 °F (
−
20 … 80 °C)
The TRANSIC151LP configuration depends on the application.
Refer to the system documentation delivered with the TRANSIC151LP for the respective
configuration.
(4.84)
(4.05)
(0.39)
(4.25)
(2.05)
(3.23)
(2.44)
36 (1.42)
19
(0.75)
(0.30)
All specifications in mm (inches)
1
1 = ø 6.5 mm, four pieces
