Sicma S.p.A.
Miglianico (CH)
page 5
SAFETY LABELS
The safety labels and the information on the machine, listed in the following table, must be
necessarily carried out; failure to carry out these warnings can cause death or severe injuries. Make
sure that the labels are always present and legible, should this not be the case contact your nearest
SICMA dealer to replace the missing or illegible ones.
1
Attention: read carefully all
instructions and safety rules
before using the machine.
2
Danger of hands injuries: do not
open or remove the safety
protections while the machine is
operating.
3
Hooking point for the
machine’s lifting.
5
ENTANGLEMENT HAZARD
To prevent serious injury or
death:
Do not unbolt or remove
safety shields while engine is
running.
4
Attention: read carefully all
instructions and safety rules before
using the machine. Stop engine and
remove key before maintenance or
repair works.
Wear eyeglasses or face guard for
eyes and face protection and head
guard to protect hearing.
6
Operate only with 540 rpm
PTO to avoid injury or
machine damage.
7
ROTATING DRIVELINE
Contact can cause death
KEEP AWAY!
Do not operate without:
•
All driveline guards, tractor and
equipment shields in place
•
Driveline securely attached at both
ends
•
Driveline guards that turn freely on
driveline
