Sicma S.p.A.
Miglianico (CH)
page 15
To connect the shredder to the front PTO of the tractor, proceed as follows:
-
Loosen the (
A
) bolts that locks the tube into place and place them on the rear connection
(Pic.1-3)
-
(
B
) unscrew the bolt that locks the rod cylinder (hydraulic or manual) (Pic.1)
-
(
C
) unscrew the bolts that the plate with the kip together (Pic.2)
-
properly anchor the mobile arc tube and cylinder to prevent it falling gearbox
-
slip off the pipe (
D
), the cylinder (
E
) (fig.1)and the plate (
F
) (Pic.2)
-
rotate 180° in those parts (Pic.3)
-
reposition their respective offices at the rear of the shredders
-
tighten the bolts
The steps must be performed in reverse order to shift from front to back
Pic. 1
Pic. 2
Pic. 3
