User Manual
* PLEASE READ AND KEEP THESE INSTRUCTIONS*
INDOOR USE ONLY
WARNING
ELECTRIC SHOCK, FIRE, AND BURN INJURIES CAN OCCUR IF
THIS EQUIPMENT IS NOT USED PROPERLY.
-
Unplug unit before cleaning, moving, or servicing.
-
Do not immerse in water
-
Remove rear panel before cleaning cabinet
-
Inside surfaces may be HOT
-
Do not spray liquids into cabinet or back panel. This could
damage electrical components.
Function & Purpose:
This unit is intended to hold food at proper serving temperature. It is
NOT intended to cook raw food.
Operation:
1. Place food warmer on fl at stable surface
2. Plug power cord into grounded electrical outlet
3. Turn power switch to ON position
4. Unit reaches maximum temperature in 20 minutes
5. Place hot food into food warmer
6. Turn off power switch, then unplug food warmer prior to
transporting
Cleaning:
-
Turn off power, unplug unit, and allow to completely cool before
cleaning the unit.
-
Clean with a damp cloth and mild detergent solution, wiping in
the grain direction.
-
Do not use abrasives, scrapers, or cleaners containing
chlorine.
-
Rinse with wet cloth, and dry with a clean dry cloth.
-
Scratches can be blended with a fi ne 3M Scotch Brite® pad,
wiping in the grain direction.
IMPORTANT:
Always provide the serial
number when ordering parts.
Note: Switch light is on whenever
unit is plugged in, or connected
to the power supply cord, even if
fuse is blown.
UNIT REACHES MAXIMUM
TEMPERATURE IN 20 MINUTES.
Refer to the next page
for the parts illustration.
SICO
®
America Inc. reserves the right to substitute materials or make changes if materials are not available or such changes improve the product.
FOOD WARMER
Model No. 4918-700 (120V)
Model No. 4918-800 (240V)
Model No. 4938-700 (120V)
Model No. 4938-800 (240V)
Caution: Risk of fi re, or electric shock. Replace only with manufac-
turer’s cord set. Contact SICO
®
Customer Care for part number.
SA1965: The lightning fl ash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product enclosure that may be of suffi cient
magnitude to constitute a risk of fi re, or electric shock to persons.
UL0004: The exclamation point, within an equilateral triangle,
is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature
accompanying the appliance.
