3
Safety Instructions
These safety instructions include important information regarding your safety and must
be observed during installation and operation of SIEB & MEYER devices. Read them
carefully and keep them for later use.
Also adhere to safety instructions in the product documentation and on the device.
3.1
Standards and Regulations
SIEB & MEYER devices comply with the regulations of the following standards and di-
rectives:
▶
Low-Voltage Directive 2014/35/EU:
EU declaration of conformity, DIN EN 61800-5-1
▶
EMC Directive 2014/30/EU:
EU manufacturer's certificate, DIN EN 61800-3
▶
Machinery Directive 2006/42/EC:
EU manufacturer's certificate, DIN EN 61800-5-2(safety functions)
Note
SIEB & MEYER frequency converters and servo amplifiers do not fall within the scope of
the Ecodesign Regulation (EU) 2019/1781 for motors and frequency converters as well
as the accompanying amendment (EU) 2021/341 because the devices are not designed
for the operation of the 50/60 Hz standard motors defined in the regulation.
Note
SIEB & MEYER products are no products according to the EU Machinery Directive. The
appropriate use of SIEB & MEYER devices in machines and installations is prohibited
until the manufacturer of the machine or installation confirms the CE conformity of the
complete machine or installation.
Note
If the mechanics or the electronics of the device are modified, the conformity with the
EC/EEC directives and thus the label will expire.
9
Drive System SD2M - Hardware Description 036228xxF
Safety Instructions
