35
detergent (see also chapter
CLEANING AND MAINTENANCE
). Never remove any
components of the back of the appliance!
3.
Install the appliance in a suitable position with an adequate distance from
sources of heat and cold.
4.
Check that the appliance and the power cord are not damaged.
5.
Install the appliance in a dry and well-ventilated place.
6.
Protect the appliance from direct sunlight.
7.
The doors must open completely and without hindrance.
8.
Install the appliance on a
level, dry and solid floor. Check the correct installation
with a bubble level.
9.
Connect the appliance to the mains properly.
10.
The nameplate is inside the appliance or at the back.
3.1 Ventilation requirements
Minimum distances required for proper ventilation:
Back ↔ wall
Min. 75 mm
Sides ↔ wall
Min. 100 mm
Free space above
Min. 100 mm
Door opening angle
Min. 132
0
3.2 Levelling
Use the adjustable feet for proper levelling and for proper air circulation in the
lower sectors of the appliance. Adjust the feet using a suitable spanner.
If you have to move the appliance, set the adjustable feet to minimum position
so the appliance can be moved on its rollers
5
easily. Readjust the appliance when
transport has been completed.
NOTICE!
The rollers are no castors and intended to move the
appliance forward and backwards only. Lateral movements can
damage your floor and the rollers.
5
Equipment depending on model.