Installation and operating instructions
AEROMAT 100
03.2020
7
Maintenance
If you notice that the ventilator does not close properly or is difficult to open because the compression strength of the fan flap
is not correct, you can adjust the compression strength by means of a small screw on the front panel of the unit.
• Slightly turn the screw into the desired direction using an appropriate screwdriver.
(+ = increase the compression strength; - = decrease the compression strength)
-
+
Besides cleaning it, the AEROMAT 100 does not need any further maintenance. If any malfunctions arise, please contact
SIEGENIA.
Cleaning
Cleaning the unit!
›
Switch off all poles of the mains cable.
›
If required, clean the outer parts of the AEROMAT 100's casing using a suitable cloth, which has been moistened with a
mild soap sud or washing-up liquid.
›
Never use cleaning agents that are aggressive or contain solvents, as these may damage the surface of the unit.
›
When cleaning the unit, prevent liquid from entering the casing.
›
Never clean the unit with a high-pressure cleaner or steam-jet cleaner.
Summary of Contents for AERO
Page 11: ......
