8
AEROMAT 150
Installation and operating instructions
Last update: 08.2014
Switch operation
•
You may operate the unit via a switch unit (accessory).
•
The switch unit allows you to choose between two blower levels and the operational mode aeration and de-aeration.
•
You may operate up to five units at the same time with one switch unit.
S1:
Turning the system on and off
S2:
Opening and closing of the locking plate
S3:
Changeover ventilation (aeration and de-aeration)
S4:
Switching of level I / II
Belüften
Entlüften
II
I
Ein
Aus
Öffnen
Schliessen
S2
S1
S4
S3
Note!
To save energy, you may also operate the Type AW4 as pressure differential ventilator without blower. To do so,
open the locking plate, and then turn off the ventilator.
Cleaning
Cleaning the unit!
›
Switch off all poles of the feeder.
›
Only clean the AEROMAT 150 as to where the unit is accessible safely. Observe the safety regulations for ladders, steps,
works in particular heights etc.
›
If required, clean the outer parts of the AEROMAT 150's casing using a suitable cloth, which has been moistened with a
mild soap sud or washing-up liquid.
›
Never use cleaning agents that are aggressive or contain solvents, as these may damage the surface of the unit.
›
When cleaning the unit, avoid liquid from entering into the casing.
›
Never clean the unit with a high-pressure cleaner or steam-jet cleaner.