39/45
39/45
01.2020
H39.ELEKS014EN-00
DRIVE - Assembly instructions
GENIUS 2.2 PANIC, Electromechanical multi-point lock
8.6
Manual adjustment of the magnetic sensor on GENIUS 2.2 PANIC
8 s
or
f
Gehen Sie in das Menü der
GENIUS 2.2 PANIK.
f
To proceed to the menu, press
the button on the GENIUS 2.2
PANIC for 8 seconds until the
menu LED magenta lights up.
The LED lights up blue or white
during these 8 seconds.
f
An acoustic signal sounds as
acknowledgement.
5 x 1 s
f
Press the button 5 times quickly
in succession (approx. 1 second
each time) until the LED lights
up light blue. You will change to
the main menu.
f
Every press of a button is
acknowledged by an acoustic
signal.
3 s
f
If the LED lights up light blue,
hold down the menu button for
approx 3 seconds. You will then
proceed to the sub-menu.
f
An acoustic signal sounds as
acknowledgement.
f
The LED flashes alternatively
light blue/white.
3 x 1 s
f
Press the button 3 times quickly
in succession (approx. 1 second
each time) until the ED flashes
light blue/red.
f
Every press of a button is
acknowledged by an acoustic
signal.
