DRIVE - Assembly instructions
GENIUS 2.2, Electromechanical multi-point lock
02.2020
6/44
H39.ELEKS013EN-00
2.4
Protective equipment
You will need the following protective equipment when
assembling a multi-point lock:
• Safety shoes
•
Protective gloves
•
Protective goggles
2.5
Safety notes
• All work on the 230 V AC mains power supply
must be carried out in compliance with the current
German VDE regulations (e.g., VDE 0100) and any
relevant country-specific requirements.
•
All-pole safety isolation should be used when rout
-
ing the network connection cable on-site.
• Wiring the unit incorrectly can irreparably damage
its electronic components.
• If energy-carrying cables are routed in parallel to
data cables (ISDN, DSL, etc.), this could lead to inter-
ference e.g. in the speed of the data transmission.
Only use the shielded original KFV cable.
2.6
Structure of the warning notes
The warning notes in these instructions
•
when observed, provide protection against potential
personal injury and material damage,
•
classify the level of danger by the signal word,
•
designate the danger of personal injury via the
hazard sign,
•
define the type and source of danger,
•
show measures to prevent hazards and prohibit
specific behaviour.
The warning notes are set up according to the following
principle:
SIGNAL WORD
Type and source of danger
Explanation of the type and source of danger
•
Measures for the prevention of the danger
The hazard sign designates warning notices that warn
of personal injury.
The type and source of the hazard defines the cause of
the hazard. The potential consequences of non-obser
-
vation of warning notices are e.g. danger to life due to
electric shock.
Under measures, actions are listed that must be carried
out for the prevention of hazards or which are prohibit
-
ed for the prevention of a hazard.
2.7
Warning notes used
DANGER
The signal word "Danger" designates an immediately
threatening danger. If this hazard is not prevented, it
leads to death or severe injuries.
WARNING
The signal word "Warning" designates a potential
hazard. If this hazard is not prevented, it could lead to
death or severe injuries.
CAUTION
The signal word "Caution" designates a potentially
hazardous situation. If this hazardous situation is not
prevented, it could lead to minor or moderate injuries.
NOTICE
The signal word "Notice" defines actions for the pre
-
vention of material damage. The observation of these
notes prevents damage to the components.
Information, advice etc.
This symbol indicates special features and designates
facts that require increased attention.
Summary of Contents for GENIUS 2.2
Page 2: ......
