02.2019
16/44
H39.MFVRS006EN-00
Multi-point locks, key operated
Assembly instructions
BS 2100, BS 2800
4.2
Swing door roller latch
4.2.1
Replace soft lock latch with swing door roller latch
2
1
1 x 5.5 mm
There is a slot [1] on the gear box
side. The locking spring [2] of the
latch shank can be opened through
this slot using a slotted screwdriver.
f
Carefully press on the locking
spring of the latch shank
through the opening using the
slotted screwdriver.
The latch shank will be released.
f
Remove the latch and replace it
with the swing door roller latch.
CLICK!
f
Carefully press the swing door
roller latch into the gear box
until the latch shank snaps into
the locking spring and then
release the latch.
The swing door roller latch must
be able to extend independently
and be held securely by the locking
spring.
5X
f
Check that the swing door roller
latch is correctly seated and
moves with ease by pressing the
latch several times (approx. 5x)
into the gear box and releasing
the latch again.
The swing door roller latch must
move with ease and extend
completely.
