H39.MFVRS006EN-00
02.2019
35/44
Assembly instructions
Multi-point locks, key operated
BS 2100, BS 2800
4.13.1 Adjustment of AT piece
When the door is closed, the latch must engage in the AT piece with as little
play as possible. The AT piece is horizontally adjustable for this purpose.
1
f
Shut the door.
The latch must engage in the
AT piece [1] and the door must
remain locked.
•
If the latch does not engage, or
if the pressure on the door seal
is too high, the AT piece must be
adjusted in the direction of the
door leaf.
•
The AT piece must be adjusted
in the direction of the frame if
the latch has too much play.
1
T 10
f
Loosen the two adjustment
screws [1].
1
f
Slide the fitting part [1]
•
The pressure will decrease in the
direction of the door leaf.
•
The pressure will increase in the
direction of the frame.
