9
Last update: 01.08.2013
Assembly instructions
GENIUS
Fitting an internal release push-button (optional)
The internal release push-button can be used to open the door
without a conventional key.
› Connect the cable (length: 750 mm) to terminals 2 and 4 on
the GENIUS door lock.
› Drill an 18 mm (without anchor) or 20 mm (with anchor) drill
hole.
Supplied with an anchor for "snap-in" installation.
Anti-intruder advice:
To effectively prevent intruders from operating the push-button from the outside, it should be
ensured that any glass panes and infill panels in the door are suitably burglar-resistant.
The infra-red eye acts as a receiver for the infra-red code
transmitted by an infra-red access key or infra-red master key. It
comes with an installation anchor suitable for use in any door
material.
› Drill a hole of diameter 20 mm (tolerance ±0.2 mm).
› Push the infra-red eye into the anchor, guiding the cable
(length: 750 mm) in first.
› Guide the cable from the infra-red eye to the GENIUS door
lock and connect it to the terminals on the (4-pin) plug on the
GENIUS door lock.
Fitting the infra-red eye (optional)
Summary of Contents for KVF Genius
Page 2: ......
Page 15: ...13 Last update 01 08 2013 Assembly instructions GENIUS ...
