background image

12

Last update: 01.08.2013

GENIUS

Assembly instructions

Liability

Intended use

Any use of this product that is not in accordance with its intended use, or any adaptation of or modification to the product 

and its associated components for which our express consent has not been obtained, is strictly prohibited. We accept no 

liability whatsoever for any material losses or injury to people caused by failure to comply with this stipulation.

Product liability

Our products are warranted – subject to correct installation and proper use – for a period of one year from the date of re-

ceipt by a company (according to our general terms and conditions) or as otherwise agreed, and for a period of two years 

for end consumers, in accordance with statutory provisions. As part of our ongoing improvements, we reserve the right to 

replace individual components or entire products. Consequential losses resulting from defects are excluded from the war-

ranty within the limits of the law. The warranty shall become void if modifications that are unauthorized by us or have not 

been described in this documentation are performed on the product and/or individual components, or if the product and/or 

individual components is/are dismantled or partly dismantled, and the defect is due to the changes made.

Exclusion of liability

The product and its components are subject to stringent quality controls. As a result, they function reliably and safely when 

used correctly. Our liability for consequential losses and/or claims for damages is excluded, except in the case of wilful mis-

conduct or gross negligence, or where we are responsible for injury to life, limb or health. Strict liability under the German 

Product Liability Act (Produkthaftungsgesetz) remains unaffected. Liability for the culpable violation of significant contractual 

obligations also remains unaffected; liability in this case is limited to losses that are specific to the contract and that could 

have been foreseen. The above regulations do not imply a change in the burden of proof to the detriment of the consumer.

Environmental protection

Although our products do not fall within the scope of the German Electrical and Electronic Equipment Act (ElektroG), KFV 

will continue to meet the requirements of this Act and will endeavour to completely eliminate the use of substances that are 

hazardous to the environment as soon as this becomes technically feasible. Electrical products should not be disposed of as 

household waste.

Feedback on documentation

We welcome your comments and suggestions on how to improve our documentation. Please send us your feedback by e-

mail to dokumentation@kfv.de.

We, KFV KG, declare under our own responsibility that this product complies with the provisions of 

Directives 2008/108/EC and 2006/95/EC of the Council of the European Union.

EU Declaration of Conformity

Technical specifications

Relative humidity

20 % bis 80 %

Ambient temperature in door

-- 10 bis + 45 °C

Dimensions

Width 16 mm, length approx. 252 mm, depth 49 mm + width of face plate

Supply voltage

24 V DC max. 500 mA

Cable types

Type

LIYCY

Ambient temperature, non-fixed

-- 5 bis + 50 °C

Ambient temperature, fixed

-- 20 bis + 70 °C

Summary of Contents for KVF Genius

















Reviews: