4
Last update: 01.08.2013
GENIUS
Assembly instructions
Installation
Fitting the GENIUS door lock
The GENIUS door lock is supplied pre-installed. It only needs to be screwed in for retrofitting or replacement purposes.
3x
Fig. 2: Fitting the GENIUS door lock
Fitting the power supply
•
The power supply ensures that the GENIUS door lock is supplied with the
right voltage.
•
Its casing is designed to be fitted on a standard DIN EN 60715 mounting
rail.
•
One power supply can supply one GENIUS door lock and one KFV access
control (wireless, transponder, infra-red or fingerprint scanner) system.
•
The power supply comes with a permanent connection. An easily-accessible
means of disconnecting it must be integrated into the power supply circuit.
Fig. 3: Power supply
Fitting cables
Various types of cable are available for connecting the power supply to the GENIUS door lock.
Each cable is marked with a band to show where it must be plugged into the GENIUS door lock.
Important:
•
When routing cables behind the face plate, ensure that they are not vulnerable to damage from the drive rod or
other moving parts.
•
The shield must be connected to earth on the power supply side. On the GENIUS side, connection of the shield is not
necessary.
Summary of Contents for KVF Genius
Page 2: ......
Page 15: ...13 Last update 01 08 2013 Assembly instructions GENIUS ...
