01.2022
6/108
H48.HSKFS0031EN
PORTAL
PremiDoor 76,
PremiDoor 76 Lux
General notes
HS
1
General notes
1.1
Target group of this documentation
This.documentation.is.addressed.exclusively.to.
specialist companies.
All.work.described.in.this.documentation.may.only.
be.carried.out.by.qualified.specialist.personnel.
who.are.trained.and.experienced.in.the.assembly,.
commissioning and maintenance of PORTAL hardware.
The.appropriate.and.safe.assembly.of.the.PORTAL.
hardware.is.not.possible.without.specialised.expertise.
Keep.these.assembly.instructions.in.a.safe.place.so.
that.you.will.be.able.to.access.them.quickly.in.case.of.
requirement.
1.2
Copyright
The.contents.of.these.instructions.are.protected.by.
copyright..Their.use.is.permissible.in.the.scope.of.
further processing of the hardware components. Any
use.beyond.this.without.the.written.consent.of.the.
producer.is.prohibited.
1.3
Guidelines of the German Association
of Quality for Locks and Hardware
(in German Richtlinien der
Gütegemeinschaft Schlösser und
Beschläge e. V.)
You.can.find.everything.worth.knowing.about.the.
proper use and maintenance of hardware for windows
and.patio.doors.in.the."Guidelines.of.the.German.
Association.of.Quality.for.Locks.and.Hardware".(in.
German.Richtlinien.der.Gütegemeinschaft.Schlösser.
und Beschläge e. V.).
We.prescribe.the.mandatory.observation.of.these.
guidelines.
You.can.find.the.current.guidelines.in.different.
languages here:
http://www.beschlagindustrie.en/ggsb/richtlinien.asp
VHBH – Hardware for windows and patio doors
Specifications.and.notes.on.the.product.and.on.liability
VHBH – Hardware for windows and patio doors
Specifications.and.notes.for.end.users
The.VHBH.guideline.also.contains.information.
on.„Instruction.obligation“..The.„Instruction.
obligation“.gives.information.on.which.
documents.and.information.must.be.passed.on.
from/to the relevant target groups.
1.4
Information and instruction obligations
The.following.documents,.in.particular,.are.available.
for.the.execution.of.the.information.and.instruction.
obligations,.which.must.be.passed.on.via.every.
(intermediary).retailer.and.fabricator.till.the.end.
customer as well as for the performance of the
maintenance work:
• planning documents
• product catalogue
•
assembly.instructions
•
SI.construction.drawings
•
maintenance.and.service.instructions
•
operating.instructions
You.can.find.the.current.documents.in.different.
languages here:
https://downloads.siegenia.com/en/
You.can.obtain.the.SI.construction.drawings.from.the.
SIEGENIA Customer Service.
Observe your obligations to inform your customers
extending to the end user!
All our product information that is directed to
building owners and/or end users e.g. maintenance
instructions, must also be passed on to the end user.
Our liability is excluded if defects or damage are
caused by a violation of our product information.
1.5 Dimensions
All.specified.dimensions.are.nominal.dimensions.and.
include the general tolerances (formerly „free size
tolerances“)..All.nominal.dimensions.are.defined.in.mm.
