IV432E Rev.01 SIEL S.p.A.
Installation and user manual
Date of issue: 2021-05-05
Pag.
37
of
50
+ FR
38
Parallel Overload
Once per 2 seconds
INV LED blinking
39
Mains Volt. Abnormal
Once per 2 seconds
Battery LED lit
40
Mains Freq. Abnormal
Once per 2 seconds
Battery LED lit
41
Bypass Not Available
BPS LED blinking
42
Bypass Unable To Trace
BPS LED blinking
43
Inverter On Invalid
44
Reserve
45
inverter not on
4.4 Options
SNMP card
:
intern
al SNMP / external SNMP optional
ƹ
Loosen the 2 torque screws (on each side of the card).
ƹ
Carefully pull out the card. Reverse the procedure for re-installation
The slot called SNMP supports the MEGAtec protocol. We advise that NetAgent II-3 port is also
a tool to remotely monitor and manage any UPS system
NetAgent II-3Ports supports the Modem Dial-in (PPP) function to enable the remote control via
the internet when the network is unavailable.
In addition to the features of a standard NetAgent Mini, NetAgent II has the option to add
NetFeeler Lite to detect temperature, humidity, smoke and security sensors. Thus, making NetAgent
II a versatile management tool. NetAgent II also supports multiple languages and is setup for
web-based
auto language detection.
Typical topology of the UPS Network Management
Relay card
A 10-pin terminal is sup
ported to offer the signals of Bypass, Utility Failure, Inverter On, Battery
Low, UPS fault, and UPS Shutdown.
The relay communication card contains six dry contact outputs and one dry input. The inputs and
outputs are factory progr
ammed according to functions listed in the table
Table: Relay Contacts (communication card)