Add-on modules
16 - English
A26361-D1042-Z120-5-7419
Replacing the processor
3
2
1
A
4
5
Push the lever in the direction of the arrow (1) and lift it as far as it will go (2).
Remove the old processor from the socket (3).
Insert the new processor in the socket so that the mark on the upper side of
the processor matches the mark (A) on the socket (4).
!
The mark on the processor may be covered by a heat sink. In this case
let yourself be guided by the marking in the rows of pins on the underside
of the processor.
Push the lever back down so that it snaps into place.
Set the switches 1, 2 , 3 and 4 depending on the processor which is installed.
Setting the processor core voltage
Processor type
Jumper VCore
Intel
not inserted
AMD-K6 - 166
AMD-K6 - 200
connected to 1-2
AMD-K6 - 233
connected to 2-3
