Document No. 540-743
Installation Instructions
September 10, 2009
Page 2 of 5
Siemens Building Technologies, Inc.
Accessories
Review Table 2 to verify that you have the appropriate mounting hardware.
For retrofit installations, normally follow the method used by the pre-existing device. You may need to replace
existing mounting hardware. Always mount the sensor vertically.
Table 2. Accessories.
P/N Description
Used
For
Reference
PTX6.4SPS
Sensor Power Supply
Module
MBC/RBC applications with digital display
545-422
182-621
Gym Guard Kit, desert
beige
gyms and similar environments requiring a guard.
(Incompatible with adapter bases and the extender
ring.)
155-222P25
(TB 193)
182-621E
Gym Guard Kit, satin
chrome
See above.
155-222P25
(TB 193)
182-683
Metal (and Wood) Stud
Mounting Bracket
(pkg. 5)
single-sensor rough-in installations. Kit includes
locator.
129-057
182-685 Spring
Clips:
Finished
Drywall Mounting Kit
(10 pack)
drywall mounting.
129-073
192-506
Electrical Box Adapter
Plate Assembly Kit
(pkg. 5)
electrical boxes mounted flush with the wall and for
gyms and similar environments requiring a guard.
(Also see
544-782
.)
Figure 8
192-860
Finish Plate Kit 1 Gang 1
Sensor; stainless steel
single-sensor, low-cost mounting. Plate is 3.7 × 5.1
inches (9.5 × 12.9 cm)
155-252P25
(TB 238)
536-666
Mounting Strap
standard light switch plate (field-supplied) to mount
sensor on 2 × 4 electrical box
540-040
540-237
544-782*
Single Adapter Base
Mounting Kit
2 × 4 boxes, all single sensor installations on walls
with oversized holes, paint lines, etc., that need to be
covered, and on exterior brick/cement-type walls. Kit
includes Electrical Box Adapter Plate Assembly
(192-495. Adapter base is 3-1/2 × 5 inches
(8.8 × 12.7 cm).
Figure 8
544-783*
Double Adapter Base
Mounting Kit
4 × 6 boxes and all double sensor installations on
walls with oversized holes, paint lines, etc., that need
to be covered, and on exterior brick/cement-type
walls. Kit includes two mounting plates (192-720).
Adapter base is 5 × 7 inches (12.7 × 18 cm).
Figure 8
544-784 Non-conduit
Rough-in
Kit, Double
double-sensor non-conduit rough-in installations. Kit
includes locator.
540-784
544-785*
Extender Ring Kit
exterior brick or cement-type walls; fits to back of
sensor base plate
—
544-800
Universal Adapter Kit
retrofitting a previous horizontal installation to a
vertical one, or when the screw spacing does not fit
the electrical box adapter plate. Kit includes multi-
slotted adapter plate.
Figure 8
981-344
Electrical Box Cover
Plate Kit
2 × 4 box rough-ins. Kit includes locator and
connector.
—
—
Various finish plates
double-sensor, low-cost mounting for a variety of
applications.
155-252P25
(TB 238)
* Product number suffixes indicate color: A = desert beige; B = white (e.g., 544-782
B
)
