Preface
1FT7 Synchronous Motors
Configuration Manual, (PFT7S) 01/2009, 6SN1197-0AD13-0BP2
11
Residual risks of power drive systems
When carrying out a risk assessment of the machine in accordance with the EU Machinery
Directive, the machine manufacturer must consider the following residual risks associated
with the control and drive components of a power drive system (PDS).
1.
Unintentional movements of driven machine components during commissioning,
operation, maintenance, and repairs caused by, for example:
–
Hardware defects and/or software errors in the sensors, controllers, actuators, and
connection technology
–
Response times of the controller and drive
–
Operating and/or ambient conditions not within the scope of the specification
–
Parameterization, programming, cabling, and installation errors
–
Use of radio devices / cellular phones in the immediate vicinity of the controller
–
External influences / damage
2.
Exceptional temperatures as well as emissions of light, noise, particles, or gas caused by,
for example:
–
Component malfunctions
–
Software errors
–
Operating and/or ambient conditions not within the scope of the specification
–
External influences / damage
3.
Hazardous shock voltages caused by, for example:
–
Component malfunctions
–
Influence of electrostatic charging
–
Induction of voltages in moving motors
–
Operating and/or ambient conditions not within the scope of the specification
–
Condensation / conductive contamination
–
External influences / damage
4.
Electrical, magnetic and electromagnetic fields generated in operation that can pose a
risk to people with a pacemaker, implants or metal replacement joints, etc. if they are too
close.
5.
Release of environmental pollutants or emissions as a result of improper operation of the
system and/or failure to dispose of components safely and correctly.
More extensive information concerning the residual risks associated with the PDS is
provided in the relevant chapters of the technical user documentation.
Summary of Contents for 1FT7 Series
Page 2: ......
Page 12: ...Preface 1FT7 Synchronous Motors 12 Configuration Manual PFT7S 01 2009 6SN1197 0AD13 0BP2 ...
Page 251: ......