manualshive.com logo in svg

Siemens 1FT7 Series, Configuration Manual

The Siemens 1FT7 Series is a high-performance motor system that combines reliability and precision. Our Operating Instructions Manual provides comprehensive guidance on how to maximize the potential of this product. Download the user manual for free from 88.208.23.73:8080 and unlock the full potential of your Siemens 1FT7 Series motor.

Share
Download
background image

Table of contents 

 

  

 

1FT7 Synchronous Motors 

14

 

Configuration Manual, (PFT7S) 01/2009, 6SN1197-0AD13-0BP2 

4 

Technical data and characteristic curves ................................................................................................. 71 
4.1 

Operating range and characteristics ........................................................................................... 71 

4.2 

Torque-speed characteristics...................................................................................................... 80 

4.2.1 

1FT7 synchronous motors with natural cooling .......................................................................... 80 

4.2.2 

1FT7 synchronous motors with liquid cooling........................................................................... 146 

4.3 

Dimension drawings.................................................................................................................. 196 

5 

Motor components ................................................................................................................................. 203 
5.1 

Thermal motor protection.......................................................................................................... 203 

5.2 

Encoder (option)........................................................................................................................ 204 

5.2.1 

Encoder overview...................................................................................................................... 204 

5.2.2 

Encoder connection for motors with DRIVE-CLiQ .................................................................... 205 

5.2.3 

Encoder connection for motors without DRIVE-CLiQ ............................................................... 205 

5.2.4 

Incremental encoders................................................................................................................ 206 

5.2.5 

Absolute encoder ...................................................................................................................... 207 

5.3 

Holding brake (option)............................................................................................................... 208 

5.3.1 

Properties.................................................................................................................................. 208 

5.3.2 

How it works.............................................................................................................................. 208 

5.3.3 

Motor-side connection of the holding brake.............................................................................. 209 

5.3.4 

Protective circuitry for the brake ............................................................................................... 209 

5.3.5 

Technical data of the holding brake .......................................................................................... 210 

5.4 

Gearbox..................................................................................................................................... 212 

5.4.1 

Dimensioning the gearbox ........................................................................................................ 212 

5.4.2 

Motors with planetary gearbox.................................................................................................. 214 

6 

Connection system ................................................................................................................................ 221 
6.1 

Power connection...................................................................................................................... 222 

6.2 

Signal connection...................................................................................................................... 225 

6.3 

Rotating the connector at the motor.......................................................................................... 229 

7 

Information on the application of motors ................................................................................................ 231 
7.1 

Transport / storage before use.................................................................................................. 231 

7.2 

Environmental conditions.......................................................................................................... 231 

7.3 

Routing cables in a damp environment..................................................................................... 232 

7.4 

Construction types .................................................................................................................... 232 

7.5 

Mounting conditions .................................................................................................................. 233 

7.6 

Operation under vibrational or shock stress conditions ............................................................ 234 

7.7 

Drive coupling ........................................................................................................................... 234 

7.8 

Brake resistances (armature short-circuit braking) ................................................................... 235 

A 

Appendix................................................................................................................................................ 241 
A.1 

Description of terms .................................................................................................................. 241 

A.2 

References................................................................................................................................ 246 

A.3 

Suggestions/corrections............................................................................................................ 247 

 

Index...................................................................................................................................................... 249 

Summary of Contents for 1FT7 Series





























































































































































































































































Reviews:

No comments

Related manuals for 1FT7 Series

JetCat RX Series Manual preview
RX Series
Brand: JetCat Pages: 54
ZF ZF 25 A Operating Instructions Manual preview
ZF 25 A
Brand: ZF Pages: 80
brel-motors MS55-60 Manual preview
MS55-60
Brand: brel-motors Pages: 2
Wisco Industries 695D/925 Series Replacement preview
695D/925 Series
Brand: Wisco Industries Pages: 6
Mercury Racing 1550 STERNDRIVE Operation, Maintenance & Warranty preview
1550 STERNDRIVE
Brand: Mercury Racing Pages: 75
Kohler Lombardini SILEO 1000 Use & Maintenance preview
Lombardini SILEO 1000
Brand: Kohler Pages: 168
Lenze IE2 g500-S Mounting And Switch On Instruction preview
IE2 g500-S
Brand: Lenze Pages: 76
Clinton AS-895E Service Manual preview
AS-895E
Brand: Clinton Pages: 23
Chamberlain LM-1600 Installation Manual preview
LM-1600
Brand: Chamberlain Pages: 20
Lycomin 0-360 Operator'S Manual preview
0-360
Brand: Lycomin Pages: 171
Saito FA-200R3 Instructions preview
FA-200R3
Brand: Saito Pages: 5
Saito FA-56B Operating Instructions Manual preview
FA-56B
Brand: Saito Pages: 6
Robin America EH12-2, EH17-2, EH25-2 Parts Manual preview
EH12-2, EH17-2, EH25-2
Brand: Robin America Pages: 24
Robin America EH36 Parts Manual preview
EH36
Brand: Robin America Pages: 28
Jabiru 3300 Installation Manual preview
3300
Brand: Jabiru Pages: 56
Zenoah 967286301 Owner'S Manual preview
967286301
Brand: Zenoah Pages: 24
DANA 4360-47 Parts List preview
4360-47
Brand: DANA Pages: 3
YAMADA DZ185cdi Operator'S Manual preview
DZ185cdi
Brand: YAMADA Pages: 2

Brands by name

Popular brands

Load more brands