A5E00264365A
Siemens AG Operating Instructions 2.02 1PL622
69
Spare parts
8
8.1
Orders for spare parts
Ordering data
Please state the following when ordering spare parts:
●
Precise part designation of the spare part and associated spare part number according to
the spare part list,
●
Machine type,
●
Serial number of the motor,
The motor type and serial number can be found on the rating plate. The serial number is
also stamped on the end face of the shaft end on the drive end.
●
Serial number of the motor.
Example:
●
End shield, drive end (part 5.00)
●
See rating plate for motor type and serial number
Commercially available, standard components can be used, but ensure that they have the
same construction type, dimensions, strength class etc.
When replacing rolling-contact bearings, in addition to the bearing identification code, the
replacement code for the bearing version is also required. Both of these codes are specified
on the lubricant plate and in the motor documentation, or on the installed bearing.
[ID: 382.02]
